R/C CARS

 

 

 

BD BS901T

1/18^th scale 4WD Electric Car/Truck is powered by 2 x 280 size electric motors driving a common output shaft. Each motor is supplied from its own 5 cell 700mHa NiCad pack in a saddle configuration. Each wheel is fitted with twin shocks and the steering control has a spring loaded servo saver. This model is packaged in a carry box RTR with TX (27MHz), Drive batteries and Battery Charger included. A choose of two body styles are available, Clear Truck similar to that pictured or Silver Corvette.

Dimensions 256(L) x 196(W) x 116(H)mm

Weight 920g

Maximum speed: Fast

 

Spare Parts: See below, suspension components same as BD BS902T.

 

 

 

 

 

Spare Parts for BD BS901T only:

BD B7003:      Electronic Speed Controller with ON/OFF switch for BD BS901T

BD B7005:      Battery pack 5 x 700mHa NiCads for BD S901T

BD S901-031:  Electric Motor with Wiring and two Capacitors (unsoldered)

BD 001:           Clear Truck Body Shell

BD 001:           Corvette Body Shell

 

Spare Parts for BD BS902T only:

BD B7020:      Engine 07 Two Stroke

BD B7021:      Pull Start for Engine 07

BD S902-003: Main Gear and Bevel Drive

BD S902-004: Drive Gears and Shaft

BD S902-029: Gear 17T With Clutch Bell

BD S902-030: Gear 19T With Clutch Bell

BD S902-032: Steering Servo Mount

BD S902-040: Throttle Servo Mount plus Servo Arm

 

 

Spare Parts common to both BD BS901T and BD BS902T:

BD B7001:      TX Wheel Radio, steering & throttle trim/reverse. 8xAA batteries. 6 channels on 27MHz

BD B7012:      Steering\Throttle Servo

BD S901-001: Tyre Black with foam inserts one pair

BD S901-002: Tyre Black/Wheel Rim Green or Yellow one pair

BD S901-003: Wheel Rim White one pair

BD S901-005: Drive gears, differential crown and pinion with shaft

BD S901-010: Outdrive shafts with pin one pair

BD S901-011: C-Hub Uprights, one pair

BD S901-012: Front Steering Arm one pair

BD S901-013: Front Lower Suspension Arm one pair

BD S901-014: Rear Lower Suspension Arm one pair

BD S901-015: Upper Suspension Arm one pair

BD S901-016: Front Shock Absorber one pair

BD S901-017: Rear Shock Absorber one pair

BD S901-024: DogBones to Wheel, Front or Rear one pair

BD S901-025: Driveshaft Front Centre one only

BD S901-026: Driveshaft Rear Centre one only

BD S901-050: Body Shell Clips 10 pieces

BD S901-086: Servo Gears to suit BD B7012

BD S902-011: Body Shell Mount

 

 

 

 

 

 

AVAILABLE MID 2009

BD BS908T

1/10^th R/C Car fitted with 18 CXP performance motor. 4WD, 2 speed auto transmission, 6061T chassis, adjustable alloy oil filled shocks,

Dimensions 450(L) x 320(W) x 210(H)mm

 

 

 

 

 

 

 

 

 

 

 

 

 

AVAILABLE MID 2009

BD BS802T

1/8^th R/C Buggy fitted with 21 CXP performance motor. 4WD, 6061T chassis, adjustable long oil filled shocks,

Dimensions 450(L) x 295(W) x 195(H)mm

 

 

 

 

 

 

 

 

ACCESSORIES
BD B7002   – Nitro Starter Set with Glow Driver & Charger, 350mL Fuel Bottle, XSpanners, Screwdrivers

BD B7004C – Glow Driver Charger, 240VAC mains powered

BD B7004J – Glow Driver 1800mAh NiCad

PG 132G     – Glow Driver and Glow Driver Charger (B7004J + B7004C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                        BD B7002                            BD B7004C                    BD B7004J                     PG 132G

 

 

 

HOME