ELECTRONIC ACCESSORIES

 

 

1. ELECTRONIC SPEED CONTROLLERS (ESC)

 

 

Aircraft – Brushless ESC

 

Features:

Programmable brake, Auto Low Voltage Cutoff,

Thermal Protection Cutoff, Gradual Voltage Cutoff,

2-3 LiPo or 6-10 NiCad/NiMh,

BEC - (2xLiPo/4 servo) or (3xLiPo/3 Servo)

TB BS25A – 20A Continuous

TB BS35A – 28A Continuous

TB BS40A – 32A Continuous

 

 

 

 

HEXTRONIK AIRCRAFT BRUSHLESS SPEED CONTROLLERS

The HXT1000 Series are high performance ESC with the following features;

• 10KHz Pulse Width Modulated switching
• NiCad, NiMh and LiPo compatible
• Programmable brake type, including Dynamic Braking
• Auto shut down upon loss of transmitter signal (fail safe)
• PC software download or USB programming key
• Over temperature protection
• Programmable low voltage cutoff
• Timing advance
• Soft start
• Rotation direction
• 2.0A BEC

 

HX 010A – 10A Continuous Current, 2-3 LiPo

HX 018A – 18A Continuous Current, 2-3 LiPo

HX 036A – 36A Continuous Current, 3-4 LiPo

HX S060 – 60A Continuous Current, 4-6 LiPo

HX 080A – 80A Continuous Current, 3-6 LiPo            HS S060

HX 120A – 120A Continuous Current, 3-6 LiPo

Note: All HXT ESC’s are supplied with a USB Programmer.

User Manuals and Programming software can be downloaded from

www.hextronik.com or supplied on CD.

 

HX USB1 – USB Programming Key

 

 

 

AIRCRAFT – Brushed ESC

TB TS35    – 35A, 6-10 NiCad, BEC 5V 2A, Soft Start

TB TS35B – 35A with Brake, 6-10 NiCad, BEC 5V 2A, Soft Start

TB T50     – 50A, 6-10 NiCad, BEC 5V 2A, Soft Start

TB T50B  – 50A with Brake, 6-10 NiCad, BEC 5V 2A, Soft Start

 

 

 

 

BLUE ARROW

BA PP3A – 3-5A Current Limited, 4-8 NiCad or NiMh cells, BEC 5V 1A,

Tx signal loss failsafe cut off, Auto low voltage cutoff 4.2V, 15x10x4mm, 6grams

 

 

 

 

 

 

 

 

Car – Brushed ESC

TB V16R110B – 35A, 4-7 cells, Forward/Brake/Reverse, BEC 5V 2A, 1/10^th Scale

 

 

 

 

 

 

 

 

AT 201305 – 6-7 cell, Forward and Brake,

Suit speed 380 or soft 540

 

 

 

 

 

 

 

 

 

 

2. GYROS

TB GR302 – Gyro HeadLock and Standard mode, Dual Rate,

Manual Gain Control, 22x20x15mm, 10g

 

 

 

 

 

 

 

 

 

3. ON BOARD GLOW DRIVERS

SC SR105 -  On Board Glow Driver, Dual Channel, Drives 1 to 5 Glow Plugs, Microprocessor Controlled

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. MISCELLANEOUS

L 400 - Servo Tester with battery holder. It can drive any servo or speed controller

that can be driven by a normal receiver.

 

 

 

 

L K506 – Relay, 6 Volt, SPDT, 5A

L K512 – Relay, 12 Volt, SPDT, 5A

 

 

 

HOME