R/C PLANES
DUCTED
FAN JETS
MIRAGE 2000
This
easy to fly electric ducted fan semi-scale Fighter is moulded from foam and
very quick to assembly. RTF or ARF with all servos and motor/esc
pre-installed. Comes complete with 11.1V 1300mAh LiPo and 12VDC LiPo charger.
Capable of takeoffs from grass and very stable to fly. Also has a steerable
nose wheel for taxing and directional control during takeoff. Flying Weight: 650g
Wingspan: 630mm Length: 970mm
Radio Gear: 4 channel, elevons x 2, rudder/nose wheel, throttle
Available in both RTF (with mode 1 or 2 TX/RX) and
ARF
(no TX or RX).
MX MIRRTFG1 – RTF Grey mode1 TX MX MIRRTFG2 – RTF Grey mode2 TX
MX MIRARFG – RTF Grey No TX/RX
Spare
Parts: Some listed below for example.
MX MIRBATT – LiPo 1300mHa 11.1V MX MIRCANOPY – Canopy Screen
MX MIRESC – Speed Controller MX MIRFAN – Ducted Fan Unit
MX MIRFUSEB – Fuse 2 piece Black MX MIRFUSEG – Fuse 2 piece Grey
MX MIRNOSEB – Nose Cone Black MX MIRNOSEG –
Nose Cone Grey
MX MIRTAILB – Vertical Tail Black MX MIRTAILG –
Vertical Tail Grey
MX MIRWINGB – Wing Pair Black MX MIRWINGG –
Wing Pair Grey
MX MIRMOTOR
– Brushless Motor MX
MIRLAND –
Rear Landing Gear
SAAB GRIFFIN JAS39
This
Canard wing Delta electric ducted fan semi-scale Fighter is moulded from foam
and very quick to assembly. RTF or ARF with all servos and motor/esc
pre-installed. Comes complete with 11.1V 1300mAh LiPo and 12VDC LiPo charger.
Capable of takeoffs from grass and loops from level flight. Also has a
steerable nose wheel for taxing and directional control during takeoff. Flying
weight 660g.
Wingspan: 670mm Length: 1070mm
Radio Gear: 4 channel, elevons x 2, rudder/nose wheel, throttle
Available in both RTF (with mode 1 or 2 TX) and ARF
(no TX or RX).
MX GRIFRTF1 – RTF mode1 TX MX GRIFRTF2 – RTF mode2 TX
MX GRIFARF
– ARF
No TX/RX
Spare
Parts: Some listed below for example.
MX GRIFBATT – LiPo 1300mHa 11.1V MX GRIFCANPY – Canopy
MX GRIFESC – Speed Controller MX GRIFFAN –
Ducted Fan
MX GRIFFUSE – Fuselage 2
piece MX GRIFLAND –
Landing Gear
MX GRIFMOTOR
– Brushless Motor MX GRIFNOSE – Nose Cone
MX GRIFTAIL
– Tail Fin MX GRIFWING –
Wing Pair
MX GRIFCWING
– Canard Wing Pair
MX
GRIFSERVO – 9g servo
FA-18 HORNET
Moulded
from foam, this easy to fly electric ducted fan semi-scale fighter is so quick
to assembly. RTF
or ARF
with all servos and motor/esc pre-installed. Comes complete with 11.1V 1300mAh
LiPo and 12VDC LiPo charger. Capable of takeoffs from grass, aerobatic enough
for an intermediate pilot with loops and rolls performed easily. Also has a
steerable nose wheel for taxing and directional control during takeoff.
Wingspan: 690mm Length: 940mm
Flying
Weight: 550g
Radio Gear: 4 CH, ailerons x 2, elev x 2, rudder/nose
wheel, throttle.
Available in
both RTF
(with mode 1 or 2 TX/RX) and ARF (no TX or RX).
MX FA18RTF1 – RTF mode1 TX MX FA18RTF2 – RTF
mode2 TX
MX FA18ARF – ARF No TX/RX
Spare
Parts: Some listed below for example.
MX FA18BATT – LiPo 1300mHa 11.1V MX FA18CANPY
– Canopy
MX FA18ESC – Speed Controller MX FA18FAN –
Ducted Fan Unit
MX FA18FUSE – Fuselage 2
piece MX FA18LAND – Rear Gear
MX FA18MOTOR
– Brushless Motor MX FA18NOSE –
Nose Cone
MX FA18HTAIL – Tailplane Pair MX FA18VTAIL –
Vertical Tail Pair
MX FA18WING –
Wing Pair MX FA18SERVO – 9g servo
RAFALE
France
military painted RAFALE Canard Delta wing has great scale detail and assemblies
in minutes. RTF
or ARF
with all servos and motor/esc pre-installed. Comes complete with 11.1V 1300mAh
LiPo and 12VDC LiPo charger. Capable of takeoffs from grass and loops from
level flight. Also has a steerable nose wheel for taxing and directional
control during takeoff. Flying Weight 660g.
Wingspan: 660mm Length: 930mm
Radio Gear: 4 CH, elevons, rudd/nose wheel, throttle
MX RAFRTF1
– RTF mode 1 TX MX RAFRTF2 – RTF mode 2 TX
MX RAFARF –
ARF
No TX/RX
Spare Parts: Some
listed below for example.
MX RAFBATT – LiPo 1300mHa 11.1V MX RAFCANPY
– Canopy
MX RAFFESC – Speed Controller MX RAFFAN –
Ducted Fan
MX RAFFUSE –
Fuselage 2 piece MX RAFLAND – Rear Gear
MX RAFMOTOR
– Brushless Motor
MX RAFNOSE
– Nose Cone
MX RAFSERVO
– 9g Servo MX RAFTAIL – Vertical Tail Fin
MX RAFCWING – Canard Wing Pair MX RAFWING – Wing Pair
AMX
This high detailed finish model is of the Italian and Brazilian airforces ground attack AMX jet. It is
available in two colour schemes, COLOUR
as shown and Italian Airforce GREY.
This is an easily hand launched foam high wing jet with no undercarriage and has
plenty of power for basic aerobatics and does ~100kph. Supplied with 11.1V
LiPo, charger, 64mm ducted fan and Brushless ESC. RTF includes 4CH 36MHz TX + RX.
Great display box design.
Span: 608mm
Length: 900mm
Flying Weight: 530g
Radio Gear: 4 CH, ailerons, rudder, elevator, throttle
MX AMXRTFCOL – RTF mode 1 TX color Blue/Yellow
MX AMXRTFG – RTF
mode 1 TX color Grey
MX AMXARFCOL – ARF, No TX/RX, color Blue/Yellow
MX AMXARFG –
ARF,
No TX/RX, color Grey
Spare
parts available.
F4N PHANTOM
Brushless
Ducted Fan model of the famous McDonnell Douglas Phantom F4N supersonic fighter
of the 1960’s. RTF package has mode1
36MHz FM TX, 11.1V/1300mHa, LiPo and charger, 64mm fan. ARF excludes TX and RX.
Smaller than our other jets and no fixed undercarriage gives superior
performance. Also great scale finish.
Wingspan
550mm Length 850mm Flying weight ~ 500g.
Radio Gear: 3 CH, ailerons, elevator, throttle.
MX F4NRTF – RTF mode 1 TX MX F4NARF –
ARF
No TX/RX
Spare
parts available.
A7 CORSAIR
The Vought A7 Corsair carrier based light attack aircraft in US
Navy scheme is available as a ARF kit
including Brushless Outrunner motor, 14.8V 2200mHa LiPo, 40A ESC, 70mm ducted fan and 4 servos
(2 x elevator and 2 x aileron) installed. No landing gear and
easily hand launched. FAST!!!
Wingspan 810mm Length 890mm Flying weight ~ 850g
MX A7 – ARF No TX/RX
Spare
parts available.